|
| Introduction |
PowerCom rectifiers are designed by emphasizing on compact size,
intelligent features and reliability. Rectifiers are designed failsafe, self-protected as
well as protecting the system to which they are connected. It is ensured against
overload by current limitation and provided with surge suppressores. |
PROVEN DESIGN
RECTIFIER FOR PRECISION USE WITH
TELECOM, RAILWAY AND CONTINUOUS
BATTERY CHARGING EQUIPMENT.
|
| Applications |
» Unattended DC stand-by systems where
the battery is used to supply DC power
when the main fails. Battery is kept in
float charge condition continuously.
» On-line DC system, where the rectifier is
used to charge the battery as well as
supplying power to the load.
» Telecommunication system in which the
charger is used as a Battery Eliminator. |
| |
| Features |
» Constant voltage charging profile and
ripple free regulated output voltage.
» Short circut fail-safe design by automatic
current limiting.
» Reverse polarity protection.
» Semiconductor-dropper is used to
compensete high voltage when charger is
connected to load in parallel.
» Complete situation monitoring options.
» Esthetically looks with heavy steel
enclosure . |
| |
| ELECTRICAL PARAMETERS |
| INPUT SPECIFICATION |
OUTPUT SPECIFICATION |
INPUT VOLTAGE RANGE :
110VAC/240VAC, 1ф
190VAC 415VAC, 3ф
INPUT VOLTAGE VARIATION :
+-
10%/+-
15%/+-
20%
FREQUENCY : 50HZ+-
5%
LINE REGULATION :
+-
1% FROM NO LOAD TO FULL LOAD
EFFICIENCY : 85% |
OUTPUT VOLT :
6V, 12V, 24V, 36V, 48V,
60V
110V, 20V(Continuous)
OUTPUT CURRENT : 1-500 AMP DC (As per req. )
RIPPLE : 0.5% to 5% (As per req.)
LOAD REGULATION :
+-
1%-3% (As per req.)
for 0-100% Load
FLOAT CHARGE : 2.35VPC( Adj.)
BOOST CHARGE : 2.45VPC( Adj.)
VOLTAGE STABILITY : +-
1% |
INDICATION : MAINS ON, LOW, HIGH, CHARGING, CHARGE FULL
METERS : VOLTMETER AND AMPERE METER
SAFETY ARRANGEMENT : SHORT CIRCUIT PROTECTED BY CURRENT LIMIT.
( FUSES ALSO POROVIDED FOR EVERY STEPS ), MCCB FOR INPUT AND OUTPUT
OVER VOLTAGE AND UNDER VOLTAGE CUTOFF. BATTERY POLARITY PROTECTED
OVER LOAD PROTECTED BY CKT. BREAKER .
TERMINAL : OUTPUT TERMINALS FOR BATTERY AND LOAD.
NOISE LEVEL : TYPICALLY LESS THAN 65 dB AT 1 M
COOLING : NATURAL / FORCED COOLING
AMBIENT CONDITION : TEMPERATURE-00 ~ 550 C, HUMIDITY-95%
CASING : STEEL FRAMED AND IP SAFETY ARRANGEMENT PROVIDED |
|
| |
| BATTERY CHARGER SERIES |
| Model |
VOLT
CAPACITY |
AMP
CAPACITY |
|
MODEL |
VOLT
CAPACITY |
AMP
CAPACITY |
| PCM0610 |
06V |
10A |
PCM4810 |
48V |
10A |
| PCM1210 |
12V |
10A |
PCM4820 |
48V |
20A |
| PCM1220 |
12V |
20A |
PCM4850 |
48V |
50A |
| PCM1250 |
12V |
50A |
PCM4810 |
48V |
100A |
| PCM12100 |
12V |
100A |
PCM11010 |
110V |
10A |
| PCM2410 |
24V |
10A |
PCM11020 |
110V |
20A |
| PCM2420 |
24V |
20A |
PCM11050 |
110V |
50A |
| PCM2450 |
24V |
50A |
PCM110100 |
110V |
100A |
| PCM24100 |
24V |
100A |
PCM22010 |
220V |
10A |
| PCM24200 |
24V |
200A |
PCM22050 |
220V |
50A |
| PCM24300 |
24V |
300A |
PCM220100 |
220V |
100A |
|
| |
